Chauvet Tiger DMX 60 Manual do Operador descarregar pdf (Página 98)

Page 130 - 3. Controlling dimmers and fixtures

Pearl 2008 Manual - 16th July 2007

3> Press G [At %].

4> Press 0 - 9 for the intensity (0=0%, 1=10%, 2=20%, 3.5=35%),

or Softkey G again for 100%

5> Press the decimal point key and another digit for more accurate

control

6> Press Channel again to get back to normal (the Exit button does

not operate in this mode)

Other things you can do by numeric entry:

• The softkey options are B: Blackout, D or G: set to 100%, E:up by

5%, F:down by 5%.

• You can select multiple dimmer handles (which you can then

control using the wheels) using softkey F [Through]. Enter the first

dimmer number, press [Through], then the last dimmer. For

example 1 Through 10 would select dimmers 1 to 10.

• You can also set multiple dimmers to the same level using softkey

F [Through]. Enter first dimmer number, [through], last dimmer,

[At %], level. For example, 1 [Through] 1 0 [At%] 5 would set

dimmers 1 to 10 to 50%.

• Softkey B [Select new fixture type] lets you tell the desk the type

of fixture you are working with. It uses this when you select

fixtures. Normally it is set to “desk channel” and will select fixtures

starting from handle 1. If you set it to dimmer, it will only select

dimmers, starting at the first dimmer patched, so selecting 1

“through” 10 would select the first 10 dimmers, wherever they are

patched. You can set the option to any fixture type you have

patched on the console.

• If you have more than one dimmer/fixture selected, Softkey C

[Odd or Even], allows you to select the odd and even numbered

channels. Softkey B selects Even channels and C selects Odd

channels. Softkey A selects all channels again after you have used

this option.

• Softkey E [Select Group] allows you to recall a group by entering

the group number.

3.1.9 Controlling fixtures by entering values

You can also directly enter values for fixture attributes. This can be

useful for programming palette values from a fixture data sheet.

1> Select the fixtures to be set by pressing the Swop buttons

2> Select the attribute to be set using the Attribute buttons

3> Type the value to set.

4> Press Softkey E or F to set the A/B wheel attribute (displayed next

to the softkey).

5> Press G [Set input to 0-255 / %] to change the entry mode

between 0-100 and 0-255.

• You can change the attributes to be set by pressing another

Attribute button, but then you will need to enter the value again.

• You can also recall groups of fixtures or dimmers (type group

number, then press A [Recall Group]).

• You can recall palette entries (type palette entry number, then

1 2 ... 93 94 95 96 97 98 99 100 101 102 103 ... 205 206

Comentários a estes Manuais

Sem comentários

Chauvet Tiger DMX 60 Manual do Operador Página 98

Comentários a estes Manuais