Chauvet Tiger DMX 60 Manual do Operador descarregar pdf (Página 101)

3. Controlling dimmers and fixtures - Page 133

Pearl 2008 Manual - 16th July 2007

2> Point all the fixtures so they light someone standing at the back

left hand corner of the square (don’t light a circle on the floor, or

your lights will be pointing at peoples’ feet all the time).

3> Select option A “Top left”. This stores the positions.

4> Point them all so they light someone standing at the back right

hand corner, then select option B “Top right”.

5> Repeat for the front corners of the stage using options C and D to

store the positions.

6> Press Enter to complete the process.

7> The Pearl will go away and do lots of calculations. The top line of

the LCD shows the progress. This can take several minutes.

8> Press ML menu then Softkey F to enable Tracking mode (option

shows [Tracking On (Off)] when tracking is enabled)

• You can recall a position you have already set, if you want to edit

it, using F [Recall] then A B C or D to recall one of the positions.

• You need to make sure you are lighting a person rather than

making a spot on the stage, because otherwise the beams will

cross over at the wrong place. If you can’t find a handy spare

person, use a plastic cup or a light coloured item of clothing over

the end of a mic stand at head height.

• If you are using moving head fixtures, you need to ensure when

hanging them that the pan stop is on the side away from the

stage, or the fixtures will not be able to track over the whole stage

area. You also need to keep the Tilt value less than 50%, or the

heads may “flip” when you track into some areas.

• Fixtures which have not been trained for Tracking will operate as

normal when tracking mode is enabled.

• When Tracking mode is turned on, the VDU screen shows “T” in

the top right hand corner.

1 2 ... 96 97 98 99 100 101 102 103 104 105 106 ... 205 206

Sem comentários

Chauvet Tiger DMX 60 Manual do Operador Página 101