Chauvet Tiger DMX 60 Manual do Operador descarregar pdf (Página 157)

11. Automated playback (script files) - Page 189

Pearl 2008 Manual - 16th July 2007

using the keypad. Or just press Enter to set the timer to zero.

4> Press E [Connect Timer] to run

the script file to the timecode.

5> The timer will run and the script

file will replay.

• You can use Time of Day as

timecode by pressing C [Clock

Timecode] from the select timer

source menu. This can be useful if

the Pearl is running time-related

lighting shows.

• You can jump to a step by typing

the step number on the keypad

and pressing Enter. If you are

using the internal clock it will

jump to the time for that step.

• When the script file is running,

softkey E becomes [Disconnect

Timer], which will stop the file

running. Softkey F becomes [Synchronise] which will synchronise

the script file to the current timer, skipping steps if necessary.

11.2.3 Using Script files in Run mode

When the Pearl is in Run mode, a special set of Script file options are

available. You can run a script file and operate the console manually at

the same time.

First you need to set the options for the script file.

D [Script file Functions] - Sets options for how the script file is run.

The menu options are:

• A [Select timer source] - Selects external or internal timecode and

starts or stops the internal timer (same as option A on the main

Script File menu)

• C [Select script file] - Allows a script file to be selected (same as

option C on the main Script File menu)

• D [Start from Step 1] - Resets the file to step 1, also resets the

internal timer, if you are using it, to the Step 1 time.

• E [Connect timer] - Runs the script file. (Same as option E on the

main Script File menu). This option changes to [Disconnect timer]

when the script file is connected.

• F [Next Step] - Moves the script file on to the next step, and

outputs the step. Also moves the internal timer on to the time for

the next step. This option changes to [Synchronise] when a script

file is running, which will skip any missed steps.

• G [Clear Script File Playbacks]. Turns off all playbacks which have

been used by the script file.

You can also press ML Menu to release the playbacks which have

been used.

C [Play Script File] - Starts the currently selected Script file (selected

using option D). The script file runs from its current position, so you

may need to reset it to step 1 (see above). If you are using the

1 2 ... 152 153 154 155 156 157 158 159 160 161 162 ... 205 206

Comentários a estes Manuais

Sem comentários

Chauvet Tiger DMX 60 Manual do Operador Página 157

Comentários a estes Manuais