Chauvet Tiger DMX 60 Manual do Operador descarregar pdf (Página 9)

1. Welcome to the Pearl - Page 1

Pearl 2008 Manual - 16th July 2007

INTRODUCTION

1. Welcome to the Pearl

This manual is designed to help you get the most out of your Pearl

console. We have divided it into two sections.

• This first section is a tutorial which gives you a step by step guide

of how to carry out the most common functions of the Pearl. If you

are new to the console, working through this part will give you a

good introduction.

• The second section is a reference manual which tells you

everything there is to know about the Pearl.

To help you move between the two sections, we have made the chapter

numbering the same, so if you are using the tutorial and you want

more information, just look for the same chapter number in the

reference manual.

At the back of the reference manual there is a Glossary, explaining

some of the technical terms used in the manual, and an Index which

can be used to find what you need in either section of the manual.

This manual applies to both the Pearl 2008 and the Pearl Tiger

consoles. The internal operating software is the same for both consoles,

but there are some external differences which are highlighted in the

text. The manual may also be used with the Pearl 2004 and Pearl 2000

consoles but some features described may not be available on the

earlier consoles.

1.1 Setting up the Pearl

Before you can use the Pearl, you need to connect various things to it.

Ensure the power is off while making these connections.

Important: Firstly check if your console has a voltage selector switch

on the back of the console next to the power socket. If it has, make

sure it matches your mains power. You can set it to 230V or 120V.

If you plug in the power with the switch set wrongly, you will

probably blow up the power supply. This would be a Bad Thing To Do

a few hours before a show.

Connect the mains inlet to an AC power supply.

If you are using an external VDU screen, connect a VGA monitor

(640x480 text mode) to the VDU output on the back of the console.

You don’t have to use the VDU screen but it does show some additional

information that is not shown on the console display.

Connect the DMX output(s) to your lighting fixtures or dimmers. The

Pearl 2000 consoles and later have four DMX output sockets. The Pearl

2000 has only two DMX sockets, but four DMX lines may be connected

to them using a splitter cable. Chapter 1 in the reference manual has

more details on DMX connections.

Plug the desk light into the socket on the top left of the console. If you

are going to use a QWERTY keyboard to set legends, plug it into its

socket.

Turn on the power. The console display and VDU screen (if you are

using one) should come alive.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 205 206

Comentários a estes Manuais

Sem comentários

Chauvet Tiger DMX 60 Manual do Operador Página 9

Comentários a estes Manuais