Chauvet Eclipse RGB Instruções de Operação descarregar pdf (Página 14)

Rev. 7 14 Eclipse™ RGB User Manual

Master/Slave

Mode

The Master/Slave mode allows a single Eclipse™ RGB unit (the “master”) to control the

actions of one or more Eclipse™ RGB units (the “slav

es”) without the need of a DMX

controller. The master unit will be set to operate in either Automatic or Sound Active

mode, while the slave units will be set to operate in Slave Mode. Once set and

connected, the slave units will operate in unison with the master unit.

Configure the units as indicated below.

Slave units:

1. Press <MENU> repeatedly until SLA shows on the display.

2. Press <ENTER> to accept.

3. Set the DMX address to 001.

4. Connect the DMX input of the first slave unit to the DMX output of the master unit.

5. Connect the DMX input of the subsequent slave units to the DMX output of the

previous slave unit.

6. Finish setting and connecting all the slave units.

Master unit:

1. Set the master unit to operate in either Automatic or Sound mode.

2. Make the master unit the first unit in the DMX daisy chain.

• Configure all the slave units before connecting the master unit to the DMX daisy

chain.

•

Never connect a DMX controller to a DMX string configured for Master/Slave

operation because the controller may interfere with

the signals from the

master unit.

• Do not connect more than 31 slave units to the master unit.

• The lasers cannot be turned off. They can be set to a slow strobe.

• At higher rotation speeds, the operation noise may increase from the

product. This is normal.

General Troubleshooting

Symptom Solution(s)

Applies to

Lights

Foggers

& Snow Controllers

Dimmers

& Chaser

Breaker/Fuse keeps

blowing

Check total load placed on device

Chase is too slow

Check users manual for speed adjustment

Device has no power

Check for power on Mains.

Check device’s fuse. (internal and/or external)

Loss of signal

Use only DMX cables

Install terminator

Note: Keep DMX cables separated from power cables

or black lights.

ü ü ü ü

No laser output

Bounce mirror motor may have shifted during shipping;

readjust

If you still have a problem, please contact CHAUVET® Technical Support.

1 2 ... 9 10 11 12 13 14 15 16

Comentários a estes Manuais

Sem comentários

Chauvet Eclipse RGB Instruções de Operação Página 14

Comentários a estes Manuais

Manuais e produtos relacionados com Holofotes Chauvet Eclipse RGB