Chauvet Abyss Led Manual do Utilizador

User Manual

DMX Primer 10 DMX Primer There are 512 channels in a DMX connection. A fixture capable of receiving DMX will require one or a number of seque

DMX Primer 11 Cable Connectors Cabling must have a male XLR connector on one end and a female XLR connector on the other end. Do not allo

DMX Primer 12 3-Pin to 5-Pin Conversion Chart If you use a controller with a 5-pin DMX output connector, you will need to use a 5-pin to 3-pin

Maintenance / Returns 13 General Maintenance To maintain optimum performance and minimize wear, fixtures should be cleaned frequently. Usage

Technical Specifications 14 TECHNICAL SPECIFICATIONS WEIGHT & DIMENSIONS Length ...

Technical Specifications 15 CONTACT US World Wide General Information CHAUVET® 5200 NW 108th Ave Sunrise, FL 33351 voice: 954.929.1115 fa

© Copyright 2013 CHAUVET®, All Rights Reserved Information and specifications in this User Manual are subject to change without notice. CHAUVET® assum

1. Before You Begin 3 1. BEFORE YOU BEGIN What is Included • 1 x Abyss™ LED 3.0 • 1 x Power Cord • 1 x Warranty Card • 1 x User Manual

1. Before You Begin 4 Safety Instructions • Please keep this User Manual for future reference. If you sell the unit to another user, be su

2. Introduction 5 2. INTRODUCTION Product Overview DMX In DMX Out DIP Switches Bracket Adjustment Knob Safety Bracket Adjustment Knob

3. Setup 6 3. SETUP AC Power This fixture runs on 100~240 VAC, 50/60 Hz. Before powering on the unit, make sure the line voltage to which

3. Setup 7 Mounting Orientation The Abyss™ LED 3.0 may be mounted in any position, provided there is adequate room for ventilation. Riggi

4. Operating Instructions 8 4. OPERATING INSTRUCTIONS Configuring the Starting Address The Abyss™ LED 3.0 fixture uses two DMX channels. Th

5. Appendix 9 5. APPENDIX General Troubleshooting SYMPTOM POSSIBLE CAUSE(S) POSSIBLE ACTION(S) Breaker/Fuse keeps blowing • Excessive cir