Chauvet SCAN LED 200 Manual do Utilizador Página 1

User Manual

4. Operating Instructions 10 12/9/2010 10:32 AM Operation DMX Operation This is the operating mode which will allow for control with an ext

4. Operating Instructions 11 12/9/2010 10:32 AM Sound-Active This fixture has a preprogrammed, sound triggered chase. Access this via the c

4. Operating Instructions 12 12/9/2010 10:32 AM DMX Channel Values 8-CH Mode CHANNEL VALUE FUNCTION CHANNEL VALUE FUNCTION 1 000 Ù 255 Pa

4. Operating Instructions 13 12/9/2010 10:32 AM 5-CH Mode CHANNEL VALUE FUNCTION 1 000 Ù 255 Pan 0°~180° 2 000 Ù 255 Tilt 0°~90° 3 000 Ù 0

5. Appendix 14 12/9/2010 10:32 AM 5. APPENDIX General Troubleshooting SYMPTOM POSSIBLE CAUSE(S) POSSIBLE ACTION(S) Breaker/Fuse keeps blowi

5. Appendix 15 12/9/2010 10:32 AM DMX Primer There are 512 channels in a DMX connection. A fixture capable of receiving DMX will require one o

5. Appendix 16 12/9/2010 10:32 AM Cable Connectors Cabling must have a male XLR connector on one end and a female XLR connector on the other

5. Appendix 17 12/9/2010 10:32 AM 3-Pin to 5-Pin Conversion Chart If you use a controller with a 5-pin DMX output connector, you will need to u

5. Appendix 18 12/9/2010 10:32 AM General Maintenance To maintain optimum performance and minimize wear, fixtures should be cleaned frequently

WEIGHT & DIMENSIONS Length ... 13.2 in

CHAUVET®, 2010, All Rights Reserved Information and specifications in this User Manual are subject to change without notice. CHAUVET® assumes no respo

1. Before You Begin 3 12/9/2010 10:32 AM 1. BEFORE YOU BEGIN What is included • 1 x Intimidator™ Scan LED 200 • 1 x Mounting bracket kit

1. Before You Begin 4 12/9/2010 10:32 AM Safety Instructions • Please keep this User Manual for future consultation. If you sell the unit

2. Introduction 5 12/9/2010 10:32 AM 2. INTRODUCTION Product Dimensions

2. Introduction 6 12/9/2010 10:32 AM Product Overview Power OutDMX In DMX Out Power InMicrophoneFuseholder

3. Setup 7 12/9/2010 10:32 AM 3. SETUP AC Power This fixture is auto-ranging and runs on 100~240 VAC, 50/60 Hz power. To determine the pow

3. Setup 8 12/9/2010 10:32 AM Mounting Orientation The Intimidator™ Scan LED 200 may be mounted in any position provided there is adequate

4. Operating Instructions 9 12/9/2010 10:32 AM 4. OPERATING INSTRUCTIONS Using the Control Panel Access control panel functions using the fo