Chauvet CORE Manual do Utilizador descarregar pdf (Página 15)

CORE™ 3x1 User Manual Rev. 1 Page 15 of 20

Configuration

(Standalone)

Set the product in one of the standalone modes to control without a DMX controller.

• Connect the product to power.

Never connect a product that is operating in any standalone mode (Static,

Automatic, or Sound-Active)

to a DMX string connected to a DMX controller.

Product

s in standalone mode may transmit DMX signals that could interfere with

the DMX signals from the controller.

Sound-Active

Mode

To enable the Sound-Active mode, do the following:

1. Press <MENU> repeatedly until Snd shows on the display.

2. Press <ENTER>.

Sound Sensitivity

To set the sound sensitivity, follow the instructions below:

1. Press <MENU> repeatedly until SEnS shows on the display.

2. Use <UP> or <DOWN>: to select the desired sound sensitivity (u 0–u100).

3. Press <ENTER>.

The product will only respond to low frequencies of music (bass and drums).

Auto Program

To select an auto program, do the following:

1. Press <MENU> repeatedly until P-- shows on the display.

2. Press <ENTER> and P 1–P 6 shows on the display.

3. Use <UP> or <DOWN> to select the desired auto program.

4. Press <ENTER>.

Program Speed

To set the auto program speed, follow the instructions below:

1. Press <MENU> repeatedly until S-- shows on the display.

2. Use <UP> or <DOWN> to select the desired auto program speed

(S 1–S100, slow to fast).

3. Press <ENTER>.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20

Sem comentários

Chauvet CORE Manual do Utilizador Página 15