Chauvet Circus Manual do Utilizador descarregar pdf (Página 10)

Page 10 of 16 Circus User Manual (Rev. 3)

Starting Address

When selecting a starting DMX address, always consider the number of DMX

channels the selected DMX mode uses. If you choose a starting address that is too

high, you could restrict the access to some of the fixture’s channels.

The Circus uses up to 3 DMX channels in its single DMX mode, which defines the

highest configurable address to 510.

If you are not familiar with the DMX protocol, you may refer to the “DMX Primer”

section in the “Technical Information” chapter.

To select the starting address, do the following:

1) Press <MENU> repeatedly until d.000~512 shows on the display.

2) Press <ENTER>.

3) Use <UP> or <DOWN> to select the starting address (000~512).

4) Press <ENTER>.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16

Sem comentários

Chauvet Circus Manual do Utilizador Página 10